Z-Wave Interfaces
Every Z-Wave-enabled smart home system must include a Z-Wave “radio” to communicate with Z-Wave products installed in the home. These radios are called “interfaces”. Most smart hubs (like our HomeTroller Pi) have built-in Z-Wave interfaces. However, more advanced systems require a separate Z-Wave interface. The interfaces below are designed to work with all HomeSeer software and hubs.
Z-NET Network Z-Wave Plus Controller
Z-NET is a network-connected controller (“Radio”) that’s designed to allow HomeSeer (or Home Assistant) systems to manage Z-Wave (and optionally Zigbee) smart home devices. Since Z-NET is IP-enabled, it may be installed anywhere a network connection is available. Z-NET supports Network Wide Inclusion (NWI) for easy pairing of Z-Wave products. Multiple Z-NETs may be used together with any HomeSeer system for a centrally managed, muti-network installation; ideal for home owners with secondary residences or outbuildings (pool houses, barns, workshops, servants quarters, etc).
Main Features
- Remote Z-Wave Interface for use with HomeSeer Software and HomeTrollers
- Supports Most Z-Wave Frequencies for Use Around the World
- Supports Z-Wave Plus (and older) Products
- Ethernet (and WiFi) Connections Allow for Optimal Positioning in Home
- Supports Network Wide Inclusion (NWI) for Easy Product “Pairing”
- May be Used with Other Z-NETs in Larger Homes or for Secondary Residences or Outbuildings
- Includes Highly Optimized Antenna for Superior Range and Performance
- Includes Easy to Use Web-Based Management Features
- Provides Easy Upgrade Path from Z-Trollers, Z-Sticks, SmartSticks and Most Other Z-Wave Interfaces
- Case Includes Keyhole slots for wall mounting (with your hardware)
Z-NET offers Z-Wave Plus controller performance in a network-connected configuration. This allows the unit to be installed anywhere a data connection exists (Etherner OR WiFi). This makes Z-NET the perfect choice for large residences and properties with outbuildings such as pool houses, barns, workshops or other quarters.
- Z-Wave Plus Certified
- Protocol: Sigma Serial API
- Built-in 700 Series Z-Wave Module
- Includes ZDK 7.18x Z-Wave Library
- Field-upgradable Firmware
- Supports most Z-Wave frequencies (configurable with HomeSeer HS4 Hubs and Software)
SmartStick+ Z-Wave Plus USB Stick
SmartStick+ is a Z-Wave Plus USB stick for use with HomeSeer (and other) smart home automation software & hubs. SmartStick+ features Network Wide Inclusion (NWI) for easy pairing of Z-Wave products and it may be combined with our Z-NET controllers for centrally managed, muti-network Z-Wave installations.
Main Features
- Z-Wave Plus certified USB Stick for use with HomeSeer Smart Home Software & HomeTroller Hubs
- Supports Most Z-Wave Frequencies for Use Around the World
- Supports Z-Wave Plus & Standard Z-Wave) Products
- Supports Network Wide Inclusion (NWI) for Easy Product “Pairing”
- Supports S2 Security – requires compatible software or hub
- Supports “Smart Start” inclusion – require compatible software or hub
- May be Used with Z-NETs in Larger Homes or for Secondary Residences or Outbuildings
- Provides Easy Upgrade Path from Z-Trollers, Z-Sticks and Most Other Z-Wave Interfaces
SmartStick+ offers the same Z-Wave Plus benefits of our Z-NET interface at a fraction of the cost. This USB dongle is best suited for HomeSeer systems that are installed in a central location of the home.
- UPC: 757347266469
- Z-Wave Plus Certified
- Protocol: Sigma Serial API
- Built-in 700 Series Z-Wave Module
- Includes ZDK 6.81x Z-Wave Library (ZDK)
- Supports most Z-Wave frequencies (configurable with HomeSeer HS4 Hubs and Software)
- Compatibility: HomeSeer HS3-based systems running under Linux or Windows 7 (or higher).
- SmartStick+ G3 User Guide
- HomeTroller S6 Pre-Driver Installer
Install this first if you have a HomeTroller S6 or S6 PRO running Windows 7
Then install driver below - SmartStick+ Windows 7 – 8 Drivers
For all HomeTrollers or HS3 systems running under Windows 7 or 8
